Samantha and Bart's Wedding Cake

In October 2013 our dear friends here in the Netherlands were getting married and asked me to make their wedding cake.

The bride choose colors of white and gold and I began to research how to use edible gold. A place in the UK sells gold both in transfer sheet and loose leaf form, so I decided to try both in 23 and 24 carat. After making the floral design based on the wedding invitations, I attempted to apply gold directly to smoothed chilled buttercream icing- and as a bonus this test cake was made up of 8 versions for the bride and groom to have a cake tasting.

The easiest version to work for me with was the 23ct 80x80 transfer sheets. Since the gold is affixed to paper, it is simple to trace the pattern onto the paper (use your pattern correct side up- the other side will go directly onto the cake), cut with scissors, and apply, soaking the paper side with either water or vodka (dries quicker) using a brush.  Leaving a small piece of paper that is bigger than the pattern for you to hold onto helps with removal of the paper. Maybe you are wondering if you can 'taste' or notice texture of the gold- definitely not. It is thinner than paper and has no flavor or texture, and as it is actual real gold, which is fairly inert, it passes right through the body. It is an edible additive, listed in the EU as an ingredient: E175.

For the first time I was creating a four-tiered cake, and using a brand new (a gift from the bride & groom!) 12" cake pan for the bottom layer. Of course I had to make a test cake of the bottom tier - and luckily my friend Viktorija's birthday at the end of September was perfect timing.

Above you can see the wedding invitation next to the test cake. Because this process results in some cracking of the gold on the buttercream, I piped white outlines on top of the gold, both for three dimensional effect and to disguise the cracks. Using a floral design works well for this because nature has irregular aspects, allowing the imperfections to contribute to the naturalness. 

The bride and groom choose the flavor of strawberries and cream over the other filling options: lemon cream, chocolate ganache, and vanilla buttercream. I used my basic buttercream for the icing on the outside of the cake, ensuring a smooth finish and worry free sitting at room temperature for hours before being served. Below: the bride, her cake, and me (even the wallpaper matched the theme!) 

The experience of creating a wedding cake for dear friends was both stressful and wonderful, and made me so happy to see their joyful faces and hear the compliments from the guests on the taste. Doing two different test cakes and cutting all the flowers ahead of time made it possible for me to create the (unstacked) wedding cake in one day. Preparation and my fabulous mother babysitting my children was the reason this could happen.

Thanks, Mom! You are the best!

Thanks to my husband for his photographs. We enjoyed every minute of this amazing event and I felt both fortunate and blessed to be a part of it. Samantha and Bart, we wish you all the best in marriage and life!

For more pictures from the wedding, Click here for the photographer's photos (The second photo is me adding the final borders to the cake and further down you see Dina helping with the rings.) 

Flower Cupcake Bouquet and a Bit of Math

Next week on Tuesday evening at 7:30pm I'm offering a Flower Cupcake Workshop. At the moment there is one spot left- contact me if you'd like to join us. During the workshop, besides learning how to make five different kinds of flowers, everyone will also enjoy snacking on cupcakes. Recently I found this example of a cupcake bouquet and had to try to make my own for the workshop snacking purpose. First, I made a bunch of mini-cupcakes and frosted with buttercream, tip 104 in a carnation style. I experimented with different sized pots and ultimately decided on a mug to hold my bouquet because it was the right size. I needed a nine centimeter foam ball but did not have time to get to a craft store so I cut a florist's block and covered it with two layers of heavy duty tissue paper.

Next, to add to the stability, I filled my Dutch mug with smooth stones because I couldn't find my daughter's glass marbles I was hoping to use.

I cut bar-b-q sticks to size and jammed three into the ball and the other end down into the rocks in the mug. I was worried one stick would not be strong enough.

I cut a stick for each cupcake and, starting with the very top, placed each cupcake by jamming one end of the stick into the green ball and the other (pointy) end into the cupcake.

 I had to reposition some cupcakes after I realized I placed them too far apart. The key to the placement is measuring the diameter of the bottom of the cupcake (for my mini-cupcakes it was 3.5cm) and using half that distance away from the nearest cupcake for the next stick. It feels too close when placing the stick but it works. Incidentally, this cupcake bouquet is not for Tuesday- it is just a test bouquet. I'll make a fresh one the day before the workshop.

 

For the finishing touch I added some leaves using tip 68.

But what about the math, you ask? In determining how big of a foam ball to use, I had to decide how many cupcakes I wanted to display. Since I had made 24, I thought perhaps around 20 or 22 would work (always have extra for the hungry mouths around here.) I only wanted to do about 2/3 of the sphere because 1/3 would be underneath of course, so a 32 faced polyhedron seemed about right. Google gave me this equation:
r=2.48*a
where r is the radius of the sphere and a is side of a six sided polygon (okay it isn't a circle but its close) packed on that sphere(polyhedron- we're being a little fuzzy here).
Pretending for a moment that this polygon is the bottom of the cupcake I used circumfrence = 6*a and then:
rc= 6a/2Pi
Where rc is the radius of the circle or cupcake.
Solving for a yields:
a=rc*Pi/3
Substituting this into the above equation:
r=2.48*rc*Pi/3
My rc (radius of the cupcake) was 1.75cm. Solving for r gave me 4.5cm or a 9cm diameter ball to give me enough room for 22 cupcakes.

I did not have a 9cm ball, however.

Not to be deterred, I had a piece of floral foam which was 7cm on the shortest side so I cut a 7cm block and kept shaving off the corners until it was a ball. I used a total of 16 mini-cupcakes on the 7cm ball. If you feel like doing more math to calculate the equation for a 7cm ball feel free. I'm going to bed.

 There you have it: math and cupcakes.

An Airplane Cake for First Birthday Boy, Liam

When my friend Jessica asked me to make her son's first birthday cake, I felt so honored. Every child's birthday is special and a first birthday is especially so! Jessica is such a creative person- the party could not have been more gorgeous. The invitations were plane tickets! The color scheme was blue and orange- absolutely perfect. Ahead of time, I made a gum-paste plane and white chocolate banner (actually I made several of each- to allow for breakage) as well as some teeny tiny gum-paste blue birds. The only non-edible part of the entire cake was the small piece of tooth-pick I used to spin the propeller on the plane. I felt it just had to be able to spin!

 I used a round tip 10 for the clouds and top border and a round tip 12 for the bottom border, piping with my recipe for Basic Buttercream.

Just before placing it,  I made a small 'rope' from gum-paste to connect the banner to the airplane.

 

Since the birthday boy loves birds, tiny blue birds adorned the clouds. They were challenging to shape due to their small size. I started with a pea-sized piece of gum-paste, rolling it into a cylinder, then pulling the wings from the sides and tail and beak from the front and back. I used a toothpick to add the eyes and a bit of feather texture on the wings and belly.

 

The birthday boy needed his own cupcake to taste, so I made him one using Wilton's 2D tip and a round tip #3 to make the white dots. Topped it off with a Number 1 candle from HEMA, one of my favorite stores in the Netherlands.

 

In order to create the curved banner in white chocolate I needed to have it dry on something curved in the same shape. I used a cardboard tube from a paper towel roll, cut in half and re-taped together to form the "S" shape. After piping the white chocolate banner on waxed paper I carefully lifted it onto the "S" and let it dry there overnight. The following day I piped the dark chocolate lettering, "Liam is 1!"

From the moment Jessica explained her request and theme I knew I was going to have a blast making this cake. It was a pleasure to create and I feel so lucky to have been a part of a very special boy's first birthday.

Sugar cookies with a Ballerina Cake

A very sweet girl I know well turned three recently, and I made her a Ballerina Cake and cupcakes.

The cake was a three-layer chocolate cake with dark chocolate ganache filling, decorated with white chocolate (colored pink), swiss buttercream, and a sugar cookie ballerina on the top.

Sugar cookies adorned the cupcakes, creating little ballerina costumes that tasted as good as they looked. The method I used included re-shaping an oval cookie-cutter so that I could create the toppers for the cupcakes:

 Then, I decorated the cookies using my basic buttercream frosting and candy pearls.

It seemed like a good idea to make a few crown shaped cookies as well (I purchased that cookie-cutter).

For the cupcakes, I used a petal tip (Wilton #104). Piping a blob in the center to begin, then doing three layers of petals:

 

 

I transported the cupcakes and cookies separately, then did the final assembly at the party.

My passion is creating unique desserts that taste as good as they look.

For the chocolate cake, I made a 6" round and two 8" round cakes, and torted them.

I filled the chocolate cake with dark chocolate ganache, so it was almost like eating a truffle with every bite.

I frosted the cake with Swiss buttercream, and had previously made pink-colored white chocolate decorations in the shape of bows, dots, and zig-zags a few days in advance.

For the ballerina cookie(I made two, in case one broke!), I decorated it with buttercream icing and 'pearls' (that were actually white sprinkles painstakingly placed).

To assemble, I used a white lolipop stick and buttercream icing to secure the cookie to the top of the cake.

Overall, the cake and cupcakes were a hit. The best part was ballerina-loving Leticia's reaction to the cake and cupcakes. Happy Birthday, Leticia! My Dina is so blessed to have you as her friend.